首页>>文献首页>>文献正文

Ductility of Square-Confined Concrete Columns

hongyaning5 添加于 2019/4/10 16:52:01  51次阅读 | 0次推荐 | 0个评论

A brief review showed considerable differences in the quantity of rectangular hoops required by various seismic design codes in the potential plastic hinge regions of rectangular reinforced concrete columns. Tests conducted on four nearly full size reinforced concrete columns with a 550 mm (21.7 in) square cross section, various axial load levels, and various quantities of rectangular hoops, are described. The hoops were designed according to the recommendations of the draft New Zealand Concrete Design Code. The columns demonstrated very ductile behaviour when loaded by simulated seismic loading up to displacement ductility factors of at least 6, confirming the adequacy of the proposed design provisions. Considerable enhancement of flexural strength was observed over that calculated by normal code design procedures, but the enhancement could be accounted for a refined flexural strength analysis which included the effect of strain hardening of the longitudinal steel and the increase in strength and ductility of the confined concrete.

作 者:Robert Park,M.J.Nigel Priestley,Wayne D. Gill
期刊名称:
期卷页: 第卷 第期 页
学科领域:工程材料 » 建筑环境与结构工程 » 结构工程
添加人是否为作者:
原文链接:
DOI:
ISBN:
关键词:
备 注:
文献笔记

   
导出选项:

评论 (0 个评论)

Page 1 of 1
<<<[1]>>>

举报 | Archiver | 科学网( 京ICP备07017567 )

GMT+8, 2011-2-15 11:31

Powered by ScienceNet.cn

Copyright © 2007- 科学时报社